详细介绍:
美国英思科 T82毒性气体检测仪
O2, CO, H2S, H2, SO2, NO2, HCN, or PH3 1 gas
= 智能型传感器可监测十几种气体中的任何一种
= 可选择数据采集和工业卫生功能,包括短期暴露极限
= (STEL)和时间加权平均值(TWA)计算功能
= 9伏锂电池可支持长达4000小时的连续运行
= 90dB声音报警及高亮度光报警
= 可选择振动报警
T82单气体检测仪提供最佳的个人气体检测,其小巧轻便、功能齐全、使用简单。先进的智能型传感器技术使该仪器能对十几种气体中的任何一种气体进行连续地检测。T82显示屏可显示STEL(短期暴露极限)和TWA(时间加权平均值)。数据采集套件可记录长达90小时的检测数据,并且可以在Windows软件平台上进行下载。
T82 单气体检测仪具有单键操作和标定功能。可持续监测和显示以下气体中的任何一种:O2,CO,H2S,H2,SO2,NO2,Cl2,ClO2,HCN,或PH3等。可自动识别即插式预校正的智能型传感器,适应各种环境要求。
T82小巧结实,具有最佳的抗射频干扰功能,90db 声报警和高亮度光报警及可选择的振动报警使用户即使在嘈杂的环境中也可收到报警。仪器配有9伏碱性电池,可持续工作2300小时,可选择的锂电池可使仪器持续工作达4000小。
T82检测仪可在 DS2 仪器管理台上进行日常维护。
技术指标
壳 体:高抗击复合材料,抗射频干扰(RFI)
尺 寸:104 mm x 67 mm x 30 mm
重 量:198 g
传 感 器:氧气和有毒气体-电化学原理
量 程:氧 气:0 ~30% VOL, 分辨率 0.1% VOL
一氧化碳: 0~1500 ppm, 分辨率 1 ppm
氯 气: 0.2~50 ppm, 分辨率 0.1 ppm
二氧化氯: 0.2~10 ppm, 分辨率 0.1 ppm
磷 化 氢: 0~10 ppm, 分辨率 0.1 ppm
氢 气: 0~1999 ppm, 分辨率 1 ppm
硫 化 氢: 0~500 ppm, 分辨率 1 ppm
氰化氢,二氧化氮,二氧化硫:0.2~150 ppm,分辨率1 ppm
电 源:9伏碱性电池 (2300小时),9伏锂电池(4000小时)
温度范围:-20~50℃
湿度范围:0~99% RH (非凝结)
国际认证:美国和加拿大:UL,cUL和CSA-Class I,Groups A,B,C,D
美国煤安认证(MSHA)
欧洲CENELEC(ATEX)和澳大利亚 - EEx ia IIC T4
随机提供
电池(已安装)、启动卡、指导手册
America intrinsic T82 toxic gas detector
O2, CO, H2S, H2, SO2, NO2, HCN, or PH3 1 gas
= intelligent sensor can be any one of a dozen in the gasmonitoring
= can choose data acquisition and industrial health functions, including short-term exposure limit
= (STEL) and the time weighted average (TWA)calculation function
= 9 volt lithium battery can support up to 4000 hours ofcontinuous operation
= 90dB sound alarm and high brightness light alarm
= optional vibration alarm
T82 single gas detector provides personal gas optimum detection, its portability, complete function, easy to use.Intelligent sensor technology advanced so that theinstrument can be used for continuous detection of any of a dozen gas in gas. T82 display screen can displaySTEL (short term exposure limit (TWA) and the time weighted average). Data acquisition package can record test data for up to 90 hours, and can be downloaded in the Windows software platform.
T82 single gas detector with a single key operation andcalibration function. Sustainable monitoring and display of any one of the following: O2, CO in the gas, H2S, H2,SO2, NO2, Cl2, ClO2, HCN, or PH3. Intelligent sensorautomatic recognition plug-in pre correction, to adapt to a variety of environmental requirements.
T82 a small firm, has anti RF interference function best,vibration 90dB sound alarm and high brightness light and alarm can alarm the user even in a noisy environmentalso can receive the alarm. The instrument is equipped with a 9 volt alkaline battery, can continuously work for 2300 hours, lithium battery can be selected can make theinstrument continues to work up to 4000 small.
The T82 tester can perform routine maintenance in DS2equipment management station.
Technical indicators
Shell: high against the composite, anti RF interference(RFI)
Size: 104 mm x 67 mm x 30 mm
Weight: 198 G
Sensor and toxic gases: oxygen - electrochemical principle
Quantity: oxygen gas: 0 ~30% VOL, resolution 0.1% VOL
Carbon monoxide: 0~1500 ppm, resolution 1 ppm
Chlorine gas: 0.2~50 ppm, resolution 0.1 ppm
Chlorine dioxide: 0.2~10 ppm, resolution 0.1 ppm
Hydrogen phosphide: 0~10 ppm, resolution 0.1 ppm
Hydrogen gas: 0~1999 ppm, resolution 1 ppm
Hydrogen sulfide: 0~500 ppm, resolution 1 ppm
Hydrogen cyanide, nitrogen dioxide, sulfur dioxide:0.2~150 ppm, resolution 1 ppm
Power source: 9 volt alkaline battery (2300 hours), 9 volt lithium battery (4000 hours)
The temperature range of -20~50 ℃:
Humidity range: 0~99% RH (non - condensing)
International certification: American and Canada: UL,cUL and CSA-Class I, Groups A, B, C, D
America verification (MSHA)
The European CENELEC (ATEX) and Australia - EEx IAIIC T4
The supplied
Battery (installed), start card, instruction manual
|