| 详细介绍：
德图testo330-2烟气分析仪
|
· testo 330-2 烟气分析仪，包括充电电池和标定证书；测量 O2, CO2, CO (带H2 补偿), 毛/净效率, 抽力/压力
· 显示充电电池状态
· 显示传感器状态
· 监测冷凝水收集盒状态，满了以后出现"FULL" 信号
· 显示泵的抽力(l/min.)
· 显示出错信息，包括描述和状态
· 显示上次维护时间
· 显示仪器温度
· 使用时间计时
|
德国德图testo 330-2烟气分析仪额外测量任务：
· ΔT测量
· 环境CO测量
· 环境CO2测量
· 通过气体检漏探头检测气体泄漏情况
· 测量气体压力的ΔP
· 气体/油液流速测量
|
德国德图testo 330-2烟气分析仪自动选择菜单：
|
|
无需取出探头，即可进行烟气传感器初始化
德国德图testo 330-2烟气分析仪内存管理
· 200组测量数据，带系统编号
· 每个系统编号下可存储多组数据
· 可通过条码笔读取信息
· IRDA接口，用于与PDA/笔记本电脑进行数据传输
· USB接口，用于与PC进行数据传输
· ZIV驱动，用于各种标准软件
接口，用于testo软件，软件带数据分析和图线功能及在线测量功能
锅炉接口
计算参数：烟气露点
显示曲线图
内置磁性防撞击保护
防护等级: IP40
充电电池寿命：运行泵的情况下大于6小时
充电电池可单独充电或置于仪器内充
可设定环境CO/CO2测量的起始报警值
TÜV认证 / EN标准
O2, CO2, CO, NO, NOlow, °C, hPa精度认证
|
Testo testo330-2 flue gas analyzer
Testo 330-2 flue gas analyzer, including charging battery and calibration; measurement of O2, CO2, CO (with H2compensation), net / gross efficiency, suction / pressure
· display battery charge state
· show the sensor state
· monitoring condensed water collecting box, filled with later appears "FULL" signal
· display force pump (l/min.)
· display error information, including the descrtption and state
· show last maintenance time
Temperature display instrument.
Use timer
Germany testo 330-2 extra measurement task of flue gas analyzer:
·Δ T measurement
· CO environment
· CO2 environment
Through the detection of gas leakage, gas leakage detecting probe
Measurement of gas pressure, Δ
· gas / oil flow measurement
Germany testo 330-2 flue gas analyzer automaticselection menu:
The probe type automatic identification of the connected
No need to remove the probe, can smoke sensorinitialization
The initialization, probe can be placed inside the flue
Germany testo 330-2 flue gas analyzer memory management
200 groups of measured data, with the system of numbering
Each system can store multiple sets of data number
· readable information by barcode pen
IRDA interface, used for data transmission and PDA/ notebook computer
USB interface, used for data transmission with PC
ZIV drive, used for a variety of standard software
Germany testo 330-2 other characteristics of flue gas analyzer
Interface, used in testo software, the software with dataanalysis and graphics functions and online measurement function
Boiler interface
Parameters: flue gas dew point
Graph display
The built-in magnetic anti-collision protection
Protection grade: IP40
Battery life: operation of the pump case is more than 6 hours.
The rechargeable battery can separate charging or an instrument filled
Initial value can be set to alarm ambient CO/CO2 measurements
T Ü V certification / EN standard
O2, CO2, CO, NO, NOlow, C, the accuracy of hPacertification
| 
放大图片
暂无相关下载
