| 详细介绍：
DUSTTRAK II美国特赛TSI气溶胶监测仪DUSTTRAK II
8530 型, 8531 型和8532 型
TSI 全新推出DUSTTRAK II 8530,8531,8532 粉尘检测仪。 提供台式或手持式，适合于任何环境和应用。 新型DUSTTRAK 气溶胶监测仪是由电池驱动，数据 资料记录以及光散射激光光度计组成，可以给出实 时地气溶胶质量浓度读数。它们应用鞘气系统来隔离光学室内的气溶胶，保持光学洁净，从而改进可靠性和低维护成本。该仪器可以用于干净的办公室，也适用于条件艰苦的工业车间、建筑工地、环境监测以及其它户外环境。DUSTTRAK II粉尘监测仪可以测量气溶胶污染物，如灰尘、烟雾、浓烟和薄雾等。
典型应用:
工业和职业卫生学调查；
室内空气质量调查；
室外环境监测；
基线的趋势跟踪和监控；
点源监测；
工程控制评估；
工程调研；
远程监测；
过程监测；
排放监测；
气溶胶研究；
DUSTTRAK II 气溶胶监测仪特点
1. 彩屏触摸显示
2. 台式8530,8531可以称重采样(可配37mm滤盒)
3. 采用激光法，采用激光法，应用鞘气系统来隔离光学室内的气溶胶，保持光学洁净，改进光学可靠性和低维护成本
4. 具有数据无线远传功能和数据优盘存储
5. 采样与检测同步进行
技术规格
传感器类型
90°光散射
气溶胶浓度范围
8530 台式型0.001 to 150 mg/m3
8531 台式型HC 0.5 to 400 mg/m3
8532 手持式0.001 to 150 mg/m3
分辨率
± 0.1% 读数，0.001 mg/m3 取大值零点稳定度
零点稳定度
± 0.002 mg/m3 (24 小时，10 秒时间常数)
粒径尺寸
0.1 to 10 μm
流量
出厂设置3.0 L/min，1.40 to 3.0 L/min 用户调节
流量准确度
出厂设置点的± 5%，内置流量控制
数据记录
5MB 内存(>60,000 数据点)1 分钟采样间隔，可记录45 天
记录间隔
可调节，1 秒到1 小时
通讯
8530/31 USB以及以太网，储存的数据可以通过U盘存贮。
8532 USB 储存的数据可以通过U 盘存贮。
报警输出
8530/31 继电器或蜂鸣器
8532 蜂鸣器
屏幕
8530/31 5.7in VGA 彩色触摸屏
8532 3.5in VGA 彩色触摸屏
称重采样
8530/31 可更换37mm 滤盒 (用户提供)
DUSTTRAK II 气溶胶监测仪特点
1. 彩屏触摸显示
2. 台式8530,8531可以称重采样(可配37mm滤盒)
3. 采用激光法，采用激光法，应用鞘气系统来隔离光学室内的气溶胶，保持光学洁净，改进光学可靠性和低维护成本
4. 具有数据无线远传功能和数据优盘存储
技术规格
传感器类型
90°光散射
气溶胶浓度范围
8530 台式型0.001 to 150 mg/m3
8531 台式型HC 0.5 to 400 mg/m3
8532 手持式0.001 to 150 mg/m3
分辨率
± 0.1% 读数，0.001 mg/m3 取大值零点稳定度
零点稳定度
± 0.002 mg/m3 (24 小时，10 秒时间常数)
粒径尺寸
0.1 to 10 μm
流量
出厂设置3.0 L/min，1.40 to 3.0 L/min 用户调节
流量准确度
出厂设置点的± 5%，内置流量控制
数据记录
5MB 内存(>60,000 数据点)1 分钟采样间隔，可记录45 天
记录间隔
可调节，1 秒到1 小时
通讯8530/31 USB以及以太网，储存的数据可以通过U盘存贮。
8532 USB 储存的数据可以通过U 盘存贮。
报警输出
8530/31 继电器或蜂鸣器
8532 蜂鸣器
屏幕
8530/31 5.7in VGA 彩色触摸屏
8532 3.5in VGA 彩色触摸屏
称重采样
8530/31 可更换37mm 滤盒 (用户提供)
DUSTTRAK II American tesai TSI aerosol monitorDUSTTRAK II
Type 8530, type 8531 and type 8532
TSI launched a new DUSTTRAK II 853085318532 dustdetector. Provide desktop or portable, suitable for anyenvironment and application. The new DUSTTRAKaerosol monitor is powered by batteries, data recordingand laser light scattering photometer, can give the real-time aerosol mass concentration. Aerosol applicationssheath gas system to isolate the optical chamber, keepclean and optical, improve reliability and low maintenance cost. The instrument can be used to cleanthe office, also suitable for the conditions of industrialworkshop, building site, environmental monitoring and other outdoor environment. DUSTTRAK II dust monitorcan measure aerosol pollutants, such as dust, smoke,smoke and mist.
Typical applications:
Industry and occupation hygiene investigation;
Investigation on indoor air quality;
Outdoor environmental monitoring;
Trend following and monitoring the baseline;
Monitoring point source;
Evaluation of Engineering control;
Engineering survey;
Remote monitoring;
Process monitoring;
Discharge monitoring;
Aerosol research;
DUSTTRAK II aerosol monitor characteristics
1 color touch display
2 table 85308531 can weighing sampling (with 37mm cartridges)
3 using a laser method, using a laser method, aerosolapplication sheath gas system to isolate the opticalchamber, keeping the optical clean, improved opticalreliability and low maintenance cost
4 has the data wireless transmission function and dataUSB storage
5 sampling synchronization and detection
Technical specifications
Sensor type
90 degree light scattering
Aerosol concentration range
Table 0.001 to 150 mg/m3 8530
8531 HC 0.5 to 400 mg/m3 desktop
A 0.001 to 150 mg/m3 8532
Resolution
± 0.1% reading, 0.001 mg/m3 maximum zero stability
Zero stability
± 0.002 mg/m3 (24 hours, 10 seconds time constant)
Grain size
0.1 to 10 m
Flow
Factory setting of 3 L/min, 1.40 to 3 L/min user control
Flow accuracy
Factory set point ± 5%, built-in flow control
Data recording
5MB memory (>60000 data) 1 minute sampling interval,which can record 45 days
Recording interval
Adjustable, 1 seconds to 1 hours
Communication
8530/31 USB and Ethernet, stored data by U diskstorage.
8532 USB stored data through the U inventory storage.
Alarm output
8530/31 relay or buzzer
8532 buzzer
Screen
8530/31 5.7in VGA color touch screen
8532 3.5in VGA color touch screen
Weighing sampling
8530/31 can replace the 37mm cartridge (users)
DUSTTRAK II aerosol monitor characteristics
1 color touch display
2 table 85308531 can weighing sampling (with 37mm cartridges)
3 using a laser method, using a laser method, aerosolapplication sheath gas system to isolate the opticalchamber, keeping the optical clean, improved opticalreliability and low maintenance cost
4 has the data wireless transmission function and dataUSB storage
Technical specifications
Sensor type
90 degree light scattering
Aerosol concentration range
Table 0.001 to 150 mg/m3 8530
8531 HC 0.5 to 400 mg/m3 desktop
A 0.001 to 150 mg/m3 8532
Resolution
± 0.1% reading, 0.001 mg/m3 maximum zero stability
Zero stability
± 0.002 mg/m3 (24 hours, 10 seconds time constant)
Grain size
0.1 to 10 m
Flow
Factory setting of 3 L/min, 1.40 to 3 L/min user control
Flow accuracy
Factory set point ± 5%, built-in flow control
Data recording
5MB memory (>60000 data) 1 minute sampling interval,which can record 45 days
Recording interval
Adjustable, 1 seconds to 1 hours
8530/31 USB and Ethernet communication, storage of data can be stored by U disk.
8532 USB stored data through the U inventory storage.
Alarm output
8530/31 relay or buzzer
8532 buzzer
Screen
8530/31 5.7in VGA color touch screen
8532 3.5in VGA color touch screen
Weighing sampling
8530/31 can replace the 37mm cartridge (users)
| 
放大图片
暂无相关下载
