| 详细介绍： CEM华盛昌CO-110一氧化碳检测仪CO110
CEM华盛昌CO-110一氧化碳检测仪CO110
CO-110一氧化碳检测仪
CO-110一氧化碳测试仪能够探测出一氧化碳（CO）的存在并且测量出1-1000 PPM的浓度。该仪表通过三种方式来显示一氧化碳的存在：
1、通过在液晶显示屏上的读数（以PPM为单位）
2、通过发出“哔哔”的声音
3、通过两种颜色的发光二极管来报警
CO-110可通过液晶显示器上的读数和“哔哔”报警声来探测出一氧化碳。“哔哔”报警功能类似于盖革计数器的滴答声：
1.在200PPM以上的一氧化碳浓度，该“哔哔”报警声将持续伴随着红色和蓝色的闪光
2.在35PPM到200PPM之间的一氧化碳浓度，“哔哔”报警声将持续伴随着红色的闪光
工作温度：
|
0℃~50℃
|
贮存温度：
|
-30℃~60℃
|
工作湿度：
|
0-99% 相对湿度(非凝固的)
|
测量范围：
|
0~1000PPM
|
测量分辨率：
|
1PPM
|
精确度：
|
±5%或±10 PPM取最大值
|
预热时间：
|
<2 秒
|
电池：
|
3.6V锂电池 (CR2)
|
传感器类型：
|
Stabilized electrochemical Gas-specific (CO)
|
传感器寿命：
|
3年
|
尺寸(HxWxD)
|
102x52x29mm
|
重量
|
84g
|
使用说明书×1
保修卡×1
3.6V电池×1
便携软皮袋×1
包装彩盒×1
CO-110 carbon monoxide detector
CO-110 carbon monoxide detector can detect the presence of carbon monoxide (CO) and measure the concentration of 1-1000 PPM. The instrument is used to show the presence of carbon monoxide through three ways:
1, through the LCD screen reading (in PPM)
2, through a "beep" sound
Alarm 3, through the light-emitting diode two colors
CO-110 through the liquid crystal display readings and"beep" sound the alarm to detect carbon monoxide. "Beep"alarm function similar to a Geiger counter ticking:
1 in the 200PPM above the concentration of carbon monoxide, the "beep" sound the alarm will continue with thered and blue flash
2 in the 35PPM to carbon monoxide concentration between 200PPM, "beep" sound the alarm will continue with the red flash
Working temperature:
0 ℃ ~50 ℃
Storage temperature:
-30 ℃ ~60 ℃
Operating humidity:
0-99% relative humidity (non solidification)
Measuring range:
0~1000PPM
The measurement resolution:
1PPM
Accuracy.
+ 5% or + 10 PPM maximum
Preheating time:
<2 seconds
Battery.
3.6V lithium battery (CR2)
Sensor type:
Stabilized electrochemical Gas-specific (CO)
Sensor life:
3 years
Size (HxWxD)
102x52x29mm
Weight
84g
Instructions for use by 1
The warranty card * 1
3.6V battery x 1
Portable soft bag x 1
Packaging box x 1
| 
放大图片
暂无相关下载
