通讯处理器SIMATICCP343-1西门子产品展示-通讯处理器SIMATICCP343-1西门子资料-通讯处理器SIMATICCP343-1西门子招商信息-

【信誉第一、诚信交易】【长期销售、安全稳定】
【称心满意、服务动力】【真诚面对、沟通无限】
【服务第一、一诺千金】【质量承诺、客户满意】

希殿电气技术(上海)有限公司(西门子合作伙伴）
联系人：康经理(销售工程师）
在线商务Q Q :192061030
联系手机：18621061383(微信）
联系电话 :021-60541249
公司传真：021-57271268
邮箱：192061030@qq.com

将 SIMATIC S7-300/SINUMERIK 840D powerline 连接至工业以太网
- 2 个 RJ45 接口，用于 10/100 Mbit/s 全双工/半双工连接，具有自动检测/自动协商和自动交叉功能
- 集成 2 端口实时交换机 ERTEC
- 多协议，可以运行 ISO，TCP 与 UDP 传输协议和 PROFINET IO
- 可调节的 Keep-Alive 功能
通信服务：
- 开放式通信（ISO、TCP/IP 和 UDP）
- PROFINET IO 控制器或 PROFINET IO 设备
- 编程器/OP通讯通过 S7 路由的交叉网络
- S7 通信（客户机，服务器，多路复用技术）
介质冗余性 (MRP)；
在采用环形拓扑结构的以太网网络内，CP 支持介质冗余程序 MRP（V2.2 或更高版本）
用于 UDP 的多点传送
通过 DHCP、简单的 PC 工具或通过程序块（例如 HMI）进行 IP 地址分配
通过可组态的访问列表实现访问保护
通过工业以太网进行远程编程与调试
使用 STEP 7 组态
通过以太网，使用 NTP 或 SIMATIC 程序自动设置 CPU 时钟
Web 诊断
可通过 SNMP（MIB2 诊断信息）集成到网络管理系统
可通过 STEP 7 或 Web 浏览器进行诊断

注：

SIPLUS extreme 产品基于 SIMATIC 标准产品。此处列出的内容来自相关的标准产品。添加了特定 SIPLUS extreme 信息。

SIPLUS CP 343-1
订货号	6AG1 343-1EX30-7XE0
基于订货号	6GK7 343-1EX30-0XE0
环境温度范围	-25 ... +70 °C
敷形涂层	印刷电路板和电子元件的涂层
技术数据	除环境条件外，也同样适用标准产品的技术数据。
环境条件
相对湿度	100 %，允许有冷凝/结霜。不允许在结露状态下进行调试。
生物活性物质，符合 EN 60721-3-3	Class 3B2 霉菌、真菌孢子（动物群除外）。运行期间，不使用的接口必须插上插头盖！
化学活性物质，符合 EN 60721-3-3	Class 3C4（包括盐雾），符合 EN60068-2-52（严重程度 3）。运行期间，不使用的接口必须插上插头盖！
机械活性物质，符合 EN 60721-3-3	Class 3S4，包括沙/尘土。运行期间，不使用的接口必须插上插头盖！
气压（取决于最高指定的最高正温度范围）	1 080 ... 795 hPa (-1 000 ... +2 000 m) 参见“环境温度范围” 795 ... 658 hPa (+2000 ... +3500 m) 降容 10 K 658 ... 540 hPa (+3 500 ... +5 000 m) 降容 20 K

有关 SIPLUS 的其它技术文档，参见：

Technical Specifications

Order number		6GK7343-1EX30-0XE0
Product type designation		CP 343-1
Transmission rate
Transfer rate
● at the 1st interface		10 ... 100 Mbit/s
Interfaces
Number of interfaces acc. to Industrial Ethernet		2
Number of electrical connections
● at the 1st interface acc. to Industrial Ethernet		2
● for power supply		1
Type of electrical connection
● at the 1st interface acc. to Industrial Ethernet		RJ45 port
● of Industrial Ethernet interface		RJ45 port
● for power supply		2-pole plugable terminal block
Supply voltage, current consumption, power loss
Type of voltage of the supply voltage		DC
Supply voltage 1 from backplane bus		5 V
Supply voltage		24 V
Supply voltage external		24 V
Supply voltage external at DC Rated value		24 V
Relative positive tolerance at DC at 24 V		20 %
Relative negative tolerance at DC at 24 V		15 %
Consumed current
● from backplane bus at DC at 5 V typical		0.2 A
● from external supply voltage at DC at 24 V typical		0.16 A
● from external supply voltage at DC at 24 V maximum		0.2 A
Power loss [W]		5.8 W
Permitted ambient conditions
Ambient temperature
● for vertical installation during operation		0 ... 40 °C
● for horizontally arranged busbars during operation		0 ... 60 °C
● during storage		-40 ... +70 °C
● during transport		-40 ... +70 °C
Relative humidity at 25 °C without condensation during operation maximum		95 %
Protection class IP		IP20
Design, dimensions and weight
Module format		Compact module S7-300 single width
Width		40 mm
Height		125 mm
Depth		120 mm
Net weight		0.22 kg
Mounting type
● S7-300 rail mounting		Yes
Performance data open communication
Number of possible connections for open communication by means of SEND/RECEIVE blocks maximum		16
Amount of data
● as user data per ISO connection for open communication by means of SEND/RECEIVE blocks maximum		8 Kibyte
● as user data per ISO on TCP connection for open communication by means of SEND/RECEIVE blocks maximum		8 Kibyte
● as user data per TCP connection for open communication by means of SEND/RECEIVE blocks maximum		8 Kibyte
● as user data per UDP connection for open IE communication by means of SEND/RECEIVE blocks maximum		2 Kibyte
Number of Multicast stations		16
Performance data S7 communication
Number of possible connections for S7 communication
● maximum		16
Performance data multi-protocol mode
Number of active connections with multi-protocol mode		32
Performance data PROFINET communication as PN IO-Controller
Number of PN IO devices on PROFINET IO controller usable total		32
Number of external PN IO lines with PROFINET per rack		1
Amount of data
● as user data for input variables as PROFINET IO controller maximum		1 Kibyte
● as user data for input variables as PROFINET IO controller maximum		1 Kibyte
● as user data for input variables per PN IO device as PROFINET IO controller maximum		1 433 byte
● as user data for output variables per PN IO device as PROFINET IO controller maximum		1 433 byte
● as user data for input variables per PN IO device for each sub-module as PROFINET IO controller maximum		240 byte
● as user data for output variables per PN IO device for each sub-module as PROFINET IO controller maximum		240 byte
Performance data PROFINET communication as PN IO-Device
Product function PROFINET IO device		Yes
Amount of data
● as user data for input variables as PROFINET IO device maximum		512 byte
● as user data for input variables as PROFINET IO device maximum		512 byte
● as user data for input variables for each sub-module as PROFINET IO device		240 byte
● as user data for input variables for each sub-module as PROFINET IO device		240 byte
● as user data for the consistency area for each sub-module		240 byte
Number of submodules per PROFINET IO-Device		32
Performance data telecontrol
Protocol is supported
● TCP/IP		Yes
Product function MIB support		Yes
Protocol is supported
● SNMP v1		Yes
● DCP		Yes
● LLDP		Yes
Configuration software
● required		STEP 7 V5.4 SP2 or higher / STEP 7 Professional V11 (TIA Portal) or higher
Identification & maintenance function
● I&M0 - device-specific information		Yes
● I&M1 – higher-level designation/location designation		Yes
Product functions Diagnosis
Product function Web-based diagnostics		Yes
Product functions switch
Product feature Switch		Yes
Product function
● switch-managed		No
● with IRT PROFINET IO switch		Yes
● Configuration with STEP 7		Yes
Product functions Redundancy
Product function
● Ring redundancy		Yes
● Redundancy manager		No
● Parallel Redundancy Protocol (PRP)/operation in the PRP-network		Yes
Protocol is supported Media Redundancy Protocol (MRP)		Yes
Product functions Security
Product function
● password protection for Web applications		No
● ACL - IP-based		Yes
● ACL - IP-based for PLC/routing		No
● switch-off of non-required services		Yes
● Blocking of communication via physical ports		Yes
● log file for unauthorized access		No
Product functions Time
Product function SICLOCK support		Yes
Product function pass on time synchronization		Yes
Protocol is supported
● NTP		Yes

注：

Technical Specifications

Area of application