低价BES-516-326-E5-Y-S 4产品展示-低价BES-516-326-E5-Y-S 4资料-低价BES-516-326-E5-Y-S 4招商信息-

Size	M18
Connection	Connector, M12x1-S04
Switching output / function	PNP/Normally open (NO)
Operating voltage	10...30 V DC
Mechanical installation condition	Flush (shielded)
Rated operating distance Sn	8 mm

Ready delay tv max.	10 ms
Utilisation category	DC 13
Switching freq. f max.	200 Hz
Temp. drift max. (% of Sr)	10%
Repeat accur. R max. (% of Sr)	5 %
Power-on indicator	No
Basic standard	IEC 60947-5-2
Function indicator	Yes
Short-circuit protected	Yes
Degree of protection as per IEC 60529	IP67
Protected against polarity reversal	Yes
Protected against reverse connection	Yes
Additional text	The sensor is functional again after the overload has been eliminated. Embeddable: See installation notes for inductive sensors with extended switching distance 825357. With connector, e.g. BKS-S 20-… total length = switch length +18 mm.

Output resistance Ra	2.0k + D + LED
Rated operating voltage Ue DC	24 V
Effective operating current Ie	130 mA
Rated insulation voltage Ui	75 DC
Rated short circuit current	100 A
Electrical version	DC, direct current
Hysteresis H max. (in % of Sr)	15 %
Minimum operating current Im	0 mA
Load capacitance max. (at Ue)	1 µF
No-load current Io damped	25 mA
No-load current Io undamped	12 mA
Off-state current Ir max.	80 µA
Ripple max. (% of Ue)	15
Switching output	PNP
Switching function	Normally open (NO)
Voltage drop static max.	3,5 V
Principle of operation	Inductive
Operating voltage	10...30 V DC