| 详细介绍： 电流开关 CS20-R
Current Relay CS20-R
The CS20-R is a low cost current relay designed for applica-tion that require an on-off indication of current. The relay will act while current is above the pre-set value，the current relay is recommended to be used for application where the operat-ing current is above 200mA。It is with 3 way selector that is used for to select the load circuit needed to be monitor.
The typical application is to monitor the work status of heat-ing element. When the load lose more than 1/3, the current switch will alarm, the alarm indicator will bright, and the con-tacts of relay will switch.
CS20-R电流开关，是一种低成本,专为只需要指示和告警电流有或无的场合应用的电流继电器。电流值超过电流预置值时就能改变输出继电器的状态，因此电流开关能应用于监视电流为200mA以上的场合。带有3路选择开关，可用于选取需要监视的负载回路。
典型的应用场合为监视加热元件的工作状态。当加热元件开路时，电流开关的告警指示灯会亮起，其辅助接点就会输出告警信号；当组合式加热元件中部分缺失，电流开关也会告警。
应用场合
Application
技术数据
Technical data
CS20-R
电源
power supply
AC220V, 50/60Hz
功耗
Power consumption
<2W
接线端子
Terminals
导线截面最大至4mm2
Conductors up to 4mm2
防护等级
Protection class
IP30
环境温度
Ambient temperature
-25 °C to +45°C
使用寿命
Life span
>100,000h
额定电流
Rated current
2.5A
额定动作点
Rated acting point
<200mA
响应时间
Response time
<1s
初始化时间
Initial time
<3s
继电器触点
Relay contacts
1NO+1NC
继电器触点额定开断容量
Rated contacts switching capacity
AC-15/250V 6A
耐压强度
Insulating strength
AC2000V, 50Hz, 1Min
安装位置
Location mounted
任意
As desire
安装方式
Mount method
DIN35mm导轨安装
Mount at DIN35 rail
外壳材料
Material of enclosure
材料性能符合DIN7708标准
Insulating material according to DIN7708 |
放大图片
暂无相关下载
