STELLOY 21-G

CLASSIFICATION

EN 14700: T Co1
ASME IIC SFA 5.21 / AWS A 5.21: ERCCoCr-C

DESCRTPTION

• Cobalt base cored wire for gas shielded metal arc hardfacing

• Co-Ci-Ni-Mo alloy deposit

• Excellent metal-to-metal wear resistance combined good corrosion resistance

APPLICATIONS

Stelloy 21-G is used for hardsurfacing parts subjected to a combination of impact, abrasion, compression, corrosion and high temperatures up to 900°C

The toughness of the deposit allows excellent resistance to thermal cycles and shocks

Less crack sensitive than other cobalt base alloys, Stelloy 21-G is used for building up large-scale sections

Used for integral seats and guides of large water and high-pressure valve bodies, drop forging dies, pump shafts and sleeves, hot punches etc.

TYPICAL ALL-WELD METAL ANALYSIS CMnSiCrNiMoFeCo

0.25	1.00	1.00	28.5	3.00	5.50	4.00	Bal.

Structure: carbides in an austenitic matrix

TYPICAL ALL-WELD METAL MECHANICAL PROPERTIES

Hardness:

As welded: 33 HRC

Work hardened: 47 HRC

CONDITIONS OF USE Current typeShielding gasGas flow rate

DC+ or pulsed	EN 439 / ISO 14175: I1 (argon), M13 (Ar+1à 2 % O2)		10 - 20 l/min

OPERATING CONDITIONS Diameter [mm] Amperage [A] Voltage [V] Stick-out [mm]

	Range	Optimum	Range	Optimum	Range	Optimum
1.2	100 - 250	200	16 - 29	28	15 - 30	10 - 25
1.6	140 - 350	250	16 - 30	28	15 - 30	10 - 25

Recovery: 95 %

WELDING POSITIONS

Flat, half up, half down

STANDARD DIAMETERS (mm)

1.2, 1.6, 2.0, 2.4 mm
Other diameters: please consult us

PACKAGING Diameter ≤ 2.4 mm ≥ 2.4 mm

Standard packaging [EN ISO 544]	Spool : BS 300	Coil : B 450	Drum
Weight	15 kg	25 kg	Up to 330 kg

Other packaging: please consult us