联系我们

联系人:刘先生(先生)

联系手机:13823219748

固定电话:8588688

企业邮箱:jlyjt88@163.com

联系我时,请说是在勒克斯之家上看到的,谢谢!

今日最新资讯
热门资讯
勒克斯之家资讯
    南方电网入围供应商关于110kV电力电缆的要求
    发布者:szjlydl  发布时间:2022-08-19 22:51:11  访问次数:181

    金龙羽电缆_金龙羽集团股份有限公司-销售中心 (jdzj.com) 金龙羽电缆 金龙羽电线 矿物电缆YTTW BBTRZ 厂家直销  (jinlongyujt.com) www.jinlongyujt.com       

    64/110kv代表着voltages of 110 kv yjlw03,02的额定电压等级--《南网附录2014》

      gb/z 额定电压220 kv 交联聚乙烯绝缘电力电缆及其附件

      power cables with cross-linked polyethylene insulation and their accessories for rated

      voltages of 220 kv

      gb/t 22078-2008 额定电压500 kv 交联聚乙烯绝缘电力电缆及其附件

      power cables with cross-linked polyethylene insulation and their accessories for rated

      voltages of 500 kv

      四、使用特性 operating characteristics

      1、 额定电压 rated voltage

      电缆额定电压用u0/u 和um 表示。

      rated voltage of cable is described as u0/u and um.

      u0—电缆设计用的导体对地或金属屏蔽之间的额定工频电压;

      u-电缆设计用的导体间的额定工频电压;

      um-设备可承受的“高系统电压”的大值。

      notes:

      u0:rated a.c. voltage between conductor and ground/l screen;

      u:rated a.c. voltage between conductors

      um:the maximum system voltage which the equipments can be beared。

      额定电压如下:

      u0/u=50/66,um=72.5;

      u0/u=64/110,um=126;

      u0/u=127/220,um=252;

      u0/u=290/500,um=550。

      2、 导体额定工作温度the rated temperature of conductor

      电缆导体的高额定工作温度为90℃。

      短时过负荷温度105℃。

      短路时(长持续时间不超过5s)电缆导体的高温度不超过250℃。

      the maximum assigned temperature of the cable conductor is 90℃.

      short time over current temperature is 105℃.

      during having a short circuit, lasting less than 5 seconds, the maximum temperature of the cable conductor

      shall not be above 250℃.

      3、 安装弯曲半径the bend radius

      安装时电缆小弯曲半径为电缆直径的25 倍。

      the minimum bend radius is 25d.

      4、 电缆敷设时导体大允许牵引力和电缆大允许侧压力

      the maximum allowed haul-off force and lateral pressure of cable

      导体大允许牵引力计算方法:

      the calculating method of the maximum allowed haul-off force :

      ——铜导体(cu):f=70×s(n/mm2)。

      ——铝导体(al):f=40×s(n/mm2)。

      侧压力计算方法:the calculating method of the maximum allowed lateral pressure:

      p=f÷r(n/m),大允许侧压力不超过3000n/m。

      p=f÷r(n/m),the maximum allowed lateral pressure≤3000n/m

      式中:f-牵引力,n; f-lateral pressure,n;

      s-导体截面,mm2; s-conductor section,mm2;

免责声明:勒克斯之家转载作品均注明出处,本网未注明出处和转载的,是出于传递更多信息之目的,并不意味 着赞同其观点或证实其内容的真实性。如转载作品侵犯作者署名权,或有其他诸如版权、肖像权、知识产权等方面的伤害,并非本网故意为之,在接到相关权利人通知后将立即加以更正。联系电话:0571-87774297。
0571-87774297