EN50264是标准壁厚机车线 耐压等级为:电力电缆0.6/1KV 1.8/3KV 3.6/6KV 控制电缆300/500V 标称截面:1.0-240mm2 工作温度:-40℃-90℃ 适用范围:适合于牵引机车、地铁车辆、动车组、铁路货(客)运列车,自动引导运输车的照明,电动门,刹车控制、空压机通信设备等系统的供电、控制回路布线。 ??一、产品标准 Product standard ??TJ/CL313-2014、EN50264-2-1: 2008、BS 6853、DIN 5510 ??二、适用范围 Scope of application ??本产品适用于额定电压 3.6/6kV 及以下各种类型地铁车辆、机车车辆配电及动力供电系统。 ??本系列产品包括: 0.6/1kV 无屏蔽、无护套电线, 1.8/3kV 无屏蔽、无护套电线, 1.8/3kV ??无屏蔽、无护套电线, 3.6/6kV 无屏蔽、有护套电缆。 ??产品适用于有各类油脂污染和非高浓度酸碱污染以及有低烟、无卤、阻燃要求的场所。 ??This products are suitable for the distribution system and power-supply system of ??railway vehicles and rolling stock that the rated voltage is 3.6/6kV or less than ??3.6/6kV. ??Including: 0.6/1 kV unshielded unsheathed wire, 1.8/3kV unshielded unsheathed wire, ??1.8/3kV unshielded sheathed wire, 3.6/6kVun shielded sheathed wire. ??The products are suitable for non-high concentration acid-alkali pollution and oil ??pollution occasion which have low-smoke halogen-free flame-retardant requirements. ??三、使用特性 Application characteristics ??1.额定电压等级U 0 /U(U m )为:0.6/1(1.2)kV1.8/3 3.6)kV和3.6/6(7.2)kV在直流系统中,电缆 ??导体与地之间的最高电压不超过电缆额定电压U 0 的1.5倍。 ??说明:“U 0 "表示施加于绝缘导体与地之间的电压,“U"表示施加于二芯或多芯电缆相导体之间 ??的电压及单芯电缆的系统电压,“U m "表示设备系统的最高电压。 ??2. 耐温特性:长期工作温度90 ??O C,累计20000h耐温120 O C,短路过载温度200 O C(5S)。 ??3. 使用环境温度:-40 ??O C. ??4. 弯曲半径:固定场合下为5-8倍电缆外径;移动场合下为4倍电缆外径。 ??5. 绝缘或护套:采用EN50264-2-1标准中规定的EI104和EM104型交联弹性体料。 ??6. 阻燃性能:通过EN50265-2-1中的单根垂直燃烧试验和EN50266-2-4 (电缆外径 ??(D)>12mm)EN50266-2-5(电缆外径6 mm<D<12mm)EN50305(电缆外径D<6mm)中的成束燃烧试验。 ??7. 耐油性能:成品电缆具优异的耐油性能,其护套耐油性能符合EN50264-2-1标准的规定 ??8. 耐酸碱性能:成品电缆护套通过EN50264-2-1 标准中的规定耐酸、碱试验。 ??9. 安全性:成品的绝缘层和护套无卤性能、低烟性能及卤素含量的危险级别符合EN45545-1 ??标准中的M级:电缆的技术指标如下: ??1. Ranks of rated voltage U 0 /U (U m ): 0.6/1(1.2) kV, 1.8/3(3.6) kV, 3.6/6(7.2) kV, ??in DC systems, the maximum voltage between cable conductor and the ground not exceeds ??1.5 times of rated voltage.